With all 3 applications, the same PD 8 frames and, in part, diagonal bracings are used. Accessories such as spindles and PD 8 stair tower components allow easy and simple use as shoring or stair towers.
High load capacity of up to 70 kN per leg
Only two different frames (R150, R110)
Different diagonal braces; available (DK125,150,186, 200,250, 300,310,350);
Easy stacking of the frames
Simple adaptation possible in case of changing clear heights
Easy transportation with the trolley with winch
Dimensions: Table system 150x125 to 150x350 Shoring tower 150x150 Stair tower 150x300
Accessories: e.g. cross head spindle, quick release spindle, castors
With various frame combinations and diagonal crossbracing, the PERI PD 8 slab tables can be used flexibly for different heights and ground plans.
With the use of the PD 8 slab tables, large moving units and room heights can be cost-effectively formed. The PD 8 system offers large spindling ranges, 880 mm at the top and 880 mm at the bottom, for easy adjustment to suit a wide range of projects. This results in large lowering heights for moving under beams or adapting easily to unequally high load-transfer areas.
For moving the PD 8 slab tables, PERI offers two possibilities:
Transportation Wheel 80
If required, the Transportation Wheel 80 is simply mounted on the vertical tube of the PD 8 frame.
The PD 8 shoring tower is type-tested for heights up to 21.30 m and loads up to 62 kN with a maximum 720 mm spindle extension. The PD 8 shoring tower can be pre-assembled on the ground. It has base dimensions of 1.50 m x 1.50 m.
The PD 8 stair tower provides safe construction site access. It can be extended up to a height of 100 m with units pre-assembled on the ground.
Do you have a question?
We would be pleased to advise you personally or send you further information.