You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

PROKIT EP 200 Fall Protection

Slab-independent securing of open edges with increased requirements
The storey-high fall protection is fastened by means of tension straps to rising structural elements. The building remains undamaged.
The powder-coated mesh barrier can also be used as rear safety protection for climbing formwork.

Overview

The 200 cm high barrier is used for securing open edges on building shells. It provides large-area protection to prevent materials falling to the ground. The barriers are easily and securely mounted between the columns or bulkheads by means of tension belts.

Easily mounted
with tension belts and cable ties

Particularly high design
featuring a standard height of 2.00 m; with a third tension belt position, also available as floor height enclosure up to 3.90 m


Technical Details

  • Protection against falling from open edges on building shells
  • Verififi cation of load capacity according to DIN EN 13374, Class A
  • 66 cm wide, powder-coated folding barrier with a height of 2.00 m; can be used up to heights of 3.90 m through mesh barrier extensions
  • Mounting with high-strength tension belts
  • Can also be used as an additional side and rear protection on climbing systems
  • With additional netting, optional use as dust protection

Do you have a question?

We would be pleased to advise you personally or send you further information.

Contact us

Regional Availability

PROKIT EP 200 Fall Protection is available in the following countries:

Local information about our product is available on our country site

Download brochure