PEP Ergo Props are mainly used for supporting slab formwork. Numerous practical features ensure fast and safe handling – this includes, for example, the Adjusting Nut indicating the direction or the ergonomic G-Hook which does not jam. Galvanization guarantees a long service life. However, if a prop does get damaged during the tough everyday working operations on the jobsite, the inner and outer tubes can be replaced separately.
PERI PEP Ergo Props are characterized by a further increase in load-bearing capacity and numerous trend-setting detailed solutions with low dead weight.
The capacity factor – defined as the load-bearing capacity to prop weight ratio – can reach up to 70 % above the values of comparable slab props. PERI PEP Ergo Props fully comply with Load Class B, D and E of EN 1065. The maximum load-bearing capacity is 50 kN.
The complete galvanisation of all surfaces guarantees a long service life.
Load-bearing capacity far beyond the norm Prop load up to 50 kN – with a comparatively low dead weight (PEP Ergo E-300+: G = 19.3 kg; max. F = 50.4 kN)
Quickly adjusted The 12 cm long adjustment range eliminates frequent re-positioning whilst the measuring scale on the inner tube accelerates length pre-adjustments
Simple connections Prop heads can be attached to both the inner and outer tubes
Trendsetting adjusting nut The form of the lowering nut dictates the direction of lowering the load while the captive handgrip allows easy adjustment
Max. load-bearing capacity
PEP Ergo B-300
PEP Ergo B-350
PEP Ergo D-150
PEP Ergo D-250
PEP Ergo D-300+
PEP Ergo D-350+
PEP Ergo D-400
PEP Ergo D-500
PEP Ergo E-300+
PEP Ergo E-350+
PEP Ergo E-400
Further technical details
Fully galvanized tubular steel slab props for transferring vertical loads
Maximum prop load: 50 kN
Building authority approved (PEP Ergo) | type-tested (PEP 20, PEP 30)
Prop lengths: up to 1.50 m | 2.50 m | 3.00 m | 3.50 m | 4.00 m | 5.00 m
Generous adjustment range of 12 cm
Total length stamped on inner tube in 10-cm increments to the pegging holes
Tripods or frames available as installation aids
Anti-crush device with a safety clearance of 10 cm provides protection against injury
Prop type and length can be read directly from the outside on the end plate, also on stacks of props
Do you have a question?
We would be pleased to advise you personally or send you further information.