You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

VT 20K Formwork Girder

The cost-effective solid web girder
Steel caps on the ends of the chords provide reliable protection against damage. Securing of the steel cap has been intentionally done in the unstressed area of the web.
The girder with a 20 cm overall height was developed specially for slab formwork operations. It can be used as a secondary and main beam.
PERI's Universal wooden formwork girder with a 20 cm overall height, optimized for use in slab formwork operations, cost-effective use also for special solutions
The VT 20K girder also carries the mark of conformity – self and third-party monitoring are thus guaranteed.

Overview

The PERI VT 20K is the economical, 20 cm high solid web girder. Robust steel caps on the ends of the chords along with the concave web end provide the girder with reliable protection against damage. The 8 cm wide chords also provide sufficient width for plywood joints.

Robust
with steel caps on the chord ends and concave web ends

Site-compliant quality
with chords made of high-quality softwood and a highly compressed web board with a high proportion of synthetic resin

Cost-effective
particularly as a girder for use in slab formwork operation


Technical Details

  • Universal wooden formwork girder with a 20 cm overall height, optimized for use in slab formwork operations, cost-effective use also for special solutions
  • 11 lengths from 1.45 m to 5.90 m
  • Weight: 5.3 kg/m
  • Permissible bearing force: 22.00 kN
  • Permissible bending moment: 5.00 kNm
  • Bending stiffness: EIy = 460 kNm²; Iy = 4.181 cm4

Do you have a question?

We would be pleased to advise you personally or send you further information.

Contact us

Regional Availability

VT 20K Formwork Girder is available in the following countries:

Local information about our product is available on our country site