Assembly and dismantling of the MDS Shoring Tower takes place with protection always provided by means of end-toend guardrails. The user is always in a safe and secure position during all assembly situations – without requiring any additional measures. The MDS Decking is attached to the ledgers without tools while any unintentional lifting from below is simply not possible. The supply of materials is carried out through the inside of the shoring tower.
Safe assembly without additional components through the specific type of design with decking and end-toend guardrails
Accelerated working operations with only a minimum of system components and constantly repeating assembly steps
Effortless handling through the low weight and ergonomically advantageous working operations (centre of the body)
Vertically-assembled shoring tower comprising PERI UP Flex system components and additional decks
As a free-standing shoring tower with assembly heights up to 6.39 m and for loads up to 45 kN; restrained at the top, up to heights of 9.39 m and loads up to 50 kN
Ground plan: 1.25 m x 1.00 m | 1.50 m | 2.00 m | 2.50 m | 3.00 m
As a shoring tower with additional frames for concentrated vertical loads
Modular adaptation of the tower ground plan in a longitudinal direction
Height adjustment in 50 cm increments by combining the MDS 100 Frame and MDS 50 Intermediate Frame; fine adjustment via the Head and Base Spindles
Do you have a question?
We would be pleased to advise you personally or send you further information.