With girder wall formwork, the arrangement of the individual system components can be freely selected. As a result, the VARIO GT 24 can be adapted to suit all geometries and requirements, e.g. tie positions or acceptable fresh concrete pressure. The system is used as project formwork in residential and industrial construction, bridge abutments and retaining walls as well as in particular for architectural concrete parts.
Adaptable to suit all requirements through the variable arrangement of formwork girders and walers
Also for architectural concrete executions due to the freely-selectable tie positioning and joint arrangement in accordance with the planning specifications
Continuous adjustment through the elongated holes in the walers and couplings with flush, aligned and tight panel connections
Flexible wall formwork with the main components: GT 24 Formwork Girder, SRZ / SRZ / SRU Steel Walers, formlining and related connecting parts
Project-related planning and assembly
Flexible panel heights, determined by the length of the GT 24 Girder (standard lengths 0.90 m to 6.00 m in 30 cm increments; special lengths up to 17.80 m)
Flexible panel widths, determined by the length of the SRZ / SRU Steel Walers
Minimizing the number of formwork girders due to their high bending rigidity and load-bearing capacity
Project-specifific construction, adaptable for accommodating a very high maximum fresh concrete pressure
Elongated holes in the steel walers and panel couplings allow 100 % tension and compression-proof panel connections resulting in tight panel joints
Do you have a question?
We would be pleased to advise you personally or send you further information.
Joseph Bernardo, Serge Bertrand, Patrice Viguié Site Managers
Having taken all possibilities into consideration, we chose the TRIO and VARIO wall formwork systems for realising the inclined walls of the Lascaux project. The handling of the TRIO elements is simple and practical at the same time, and the inclined surfaces could be joined together without any problems whatsoever – in spite of the changes in inclination between the individual wall sections. After carrying out some adjustments, the VARIO formwork proved to be a very sensible choice for forming the adjacent walls with counter-positioned inclinations.
As has been the case for many years, PERI has also provided us with reliable support during this project. The VARIOKIT solution perfectly combines functionality, flexibility, reliability and faster assembly. With the quickly understood, practical solutions, we can optimally fulfil all technical requirements of the project. As usual, the PERI solution takes into account all required details.
I have already been working with PERI systems for many years and I am convinced that the ACS Climbing System and the VARIO Wall Formwork are the optimum solution. ACS enabled us to reduce the build time. In my opinion PERI offers the best formwork systems in terms of technology.
We have been working with PERI formwork for 15 years now and have always achieved good fair-faced concrete results. The systems are easy to understand, and they work and they fit. What is more, when we have specific questions, PERI always offers us proficient answers and solutions immediately. Therefore, for these high walls, we could only imagine to do it with PERI VARIO. The result fully fulfils the ideas of the architect.