The VGB cantilevered parapet track is used for the fabrication and refurbishment of outer and centered cantilevered parapets – preferably starting from a superstructure length of more than 150 m. The track runs on castors which are mounted to the lower part of the cantilever and it is moved via an integrated rope winch. A precondition for the utilization is a cantilever without interruptions and with a minimum width of 1.50 m.
Adaptable The cantilevered parapet bracket can be flexibly adjusted to very different parapet geometries.
Fast Time-saving execution due to setting and striking in just two steps per unit.
Convenient The roller units safely carry the full concrete load without extra anchors.
Individual formwork configurations depending on the parapet geometry
The influence width depends on the parapet size. The guidelines are approximately as follows:
Influence width 1.50 m for cross-sectional areas of parapet up to 0.20 m²
Influence width 1.25 m for cross-sectional areas of parapet up to 0.40 m²
Influence width 1.00 m for cross-sectional areas of parapet up to 0.60 m²
Reasonable moving lengths up to 25 m
Do you have a question?
We would be pleased to advise you personally or send you further information.